R-GEN 100 Multimodal Bioprinter

The tabletop 3D bioprinter bringing the future of medicine closer

Each R-GEN bioprinter is personally configured to specifically meet your needs of your bespoke research goals.

Combine jetting, contact dispensing and electrowriting technologies with a full range of auxiliary process options to build simple or complex constructs.

REGENHU’s scientific advisors are available to guide you to your optimal instrument.

  • R-gen-100 desktop bioprinter from Regenhu

    Key Features

    • Multiple technology combinations - 6 dispensing technologies available, 5 printhead tools slots and independent temperature control for each printhead tool. Full workzone coverage and quick release clip for seamless cartridge filling
    • Optimised workzones - Standard workzone. Electrospinning and writing plus physiologically temperature controlled (5-40°C) and high temperature controlled (RT to 80°C) workzones available
    • Ergonomics - Facilitated cartridge filling and replacement. Easy change of workzones with reduced cross-contamination with cleaning and purging station including real-time parameter adjustment with a modern instrument interface
    • Calibrations and monitoring system - Contactless needle offset calibration, substrate height calibration option and process supervision system
    • Process flexibility - Layer-by-layer support materials allowing fresh complex structures
    • Additional options and kits - Physical crosslinking, cartridge stirring system, integrated cleaning and purging station for tool cleaning

The R GEN multimodal bioprinter allows you to tailor your system to your specific requirements combining multiple printing technologies in a single process to mimic native tissue architecture, composition and complexity.

Pneumatic extrusion enables versatile processing of a wide range of different bioinks.

The light-curing kit enables for a fast, in-process crosslinking of photocurable materials while minimising the dose provided to cells.

The easy-to-use, intuitive SHAPER software and accurate optical calibration systems allow the process to be easily and automatically repeated in multiple wellplates for high-throughput screening.

  • Regenhu dynamic formulation module for co-axial printing of custom materials

    Regenhu DFM – Dynamic Formulation Module

    Multimaterial extruder for advanced formulations dispensing.

    • Multimaterial contact dispensing tool for low-viscosity materials
    • Volumetric flow control and real-time components ratio tuning
    • Printing of continuous strands or coaxial fibres

    Ideal for heterogeneous tissue engineering, drug discovery, biomaterial processing and core-shell printing

  • Independent Temperature Control

    Independent temperature management of each material cartridge and extrusion nozzle temperature and workzone ensures you maintain optimal print conditions.

    Electro-Spinning and Writing

    All R-GEN instruments are built with the ability to be easily upgraded with electro-spinning and writing technology allowing the creation of micro- and nano-fibers.

    Exchangeable Workzones

    The instrument modularity gives you the possibility to easily and quickly change your instrument base plate according to your needs.
    Select amongst 4 different workzones to manage temperature in the physiological range or above, to generate micro- and nano-fibers, or to simply print in specific labware.

  • Adjust Parameters in Real-Time

    Adjust and refine print parameters any time during the print process.

    Monitor Protocol Actions

    Visualize the protocol sequence and action status with the progress tracker.

    Reduce Protocol Development Time

    Run trial print protocols using rough print parameters, close-up observation and real-time parameter adjustments to quickly identify optimum protocol conditions.

  • All
  • Additive Manufacturing
  • Biological Microscopy
  • Bioprinting
  • Cell Culture
  • DLP Bioprinters
  • Extrustion Bioprinters
  • Fluorescent Microscopy
  • Microfluidic Bioprinters